TOA Industrial Lacquer

TOA Industrial Lacquer is produced from high quality nitrocellulose and special pigment. It offers quick dry, high hardnesss and good color retention paint film.

View DetailCompact

Intended use:

TOA Industrial Lacquer is recommended for interior use, to decorate and protect wood, metal surfaces.

Specifications

  • Color: Refer to catalogue
  • Component: Binder (30%-40%); Solvent (40%-50%); Additive (0%-5%), Powder (15% - 25%)
  • Finish: Gloss and Matt
  • Specific Gravity: 0.92-1.22 kg/litre ( excepts #999)
  • Theoretical Coverage: 12 - 16 m²/litre/coat approx.(depend on color)
  • Dry Time:
  • - Touch Dry: After 6 mins
  • - Dry for recoat: After 10 mins
  • - Hard dry: After 1 hours

Construction methods

  • Tools: Brush, Spray gun, roller
  • Dilution thinner: TOA Thinner #71 or Lacquer paint thinner
  • Dilution ratio: TOA Industrial Lacquer ː Thinner = 1ː1 - 2 by Volume (depend on application)

Construction Guide

Surface Preparation
For metal surface: Make sure the surface is dry and clean, free from grease, oil, waxy contamination, rust or mill scale.
For wood surface: Sand out wood surface smoothly then fill all damage and gap by appropriate filler. Sand again and clean until no dust remain.
Application
Primer:- For metal surface: apply 1-2 coat(s) of TOA IL Grey primer.
           - For wood surface: apply 1-2 coats with appropriate primer.
Topcoat: Apply 2 -3 coats of TOA Industrial Lacquer.

Recommended paint system

Primer:
- For metal surface: apply 1-2 coat(s) of TOA IL Grey Primer.
- For wood surface: apply 1-2 coats with appropriate primer.


Topcoat:
- Apply 2 -3 coats of TOA Industrial Lacquer.

Send us a message