Homecote alkyd high gloss enamel

Homecote alkyd high gloss enamel is high quality Alkyd paint without using Lead & Mercury in manufacturing process. It's the safe paint for health with features: fast drying, glossy surface, high coverage, anti fungus and beautiful colors.
 

View DetailCompact

Intended use:

Homecote alkyd high gloss enamel is applied on woods, metals and other surfaces which primed properly. This product could be used for both interior and exterior.

Technical Data

  • Component: Binder(45-55%), Powder(15-25%), Solvent (20-30%), Additive (10-15%)
  • Theoretical coverage: 12 -15 m2/litre/coat approx
  • Drying time:
  • - Touch dry: 2 - 4 hours
  • - Painting interval: 10-12 hours

Construction methods

  • Application tools: Brush, Spray gun, Roller
  • Dilution thinner: TOA Thinner #21
  • Dilution ratio: Depend on application
  • Brush/Roller: 0% - 10% by volume
  • Spray gun: 10% - 20% by volume

Construction Guide

Step 1 - Surface preparation:
- Make sure the surface is dry and clean, free from grease, oil, waxy contamination, rust or mill scale.
- Remove old paint and clean old surface by appropriate sandpaper.
Step 2 - Primer: For metal surface apply 1-2 coat(s) of Homecote red or grey oxide primer
Step 3 - Top coat: Apply 2 coats of Homecote alkyd high gloss enamel
*Note: Stir well before using and once opened, entire contents should be used.| Do not apply when temperature is lower than 15ºC or humidity is higher than 85%. Surface temperature must be 3ºC higher than the dew point

Recommended paint system

Primer:
- For metal surface: 1 - 2coat(s) of Homecote grey/red oxide primer
- For wood surface: 1-2 coat(s) of suitable primer


Top coat:
- 2 coats of Homecote alkyd high gloss enamel

Send us a message