Homecote Red Oxide Primer

Self-coloring paint

Color board

Technical Data

Product safety information

Homecote red oxide primer is produced from high quality Alkyd resin and special rust inhibitive pigment. This is the safe paint for health since Lead & Mercury aren't used in manufacturing process

View DetailCompact

Intended use:

Homecote red oxide primer is quick drying, rust prevention primer, suitable for iron and steel surface in the such application as: construction structures, machineries, railways, gates, trellis, windown, towers, tanks, etc….

Color: Red
Component: Binder(20-30%), Powder(55-65%), Solvent (10-20%), Additive (1-10%)
Theoretical coverage: 13-16 m²/litre/coat approx
Drying time:
- Touch dry: afetr 30 mins
- Painting interval: after 8 hours

Application tools: Brush, Spray gun, Roller
Dilution thinner: TOA Thinner #21
Dilution ratio: Depend on application
Brush/Roller: 0% - 10% by volume
Spray gun: 10% - 20% by volume

Step 1 - Surface preparation:
- Make sure the surface is dry and clean, free from grease, oil, waxy contamination, rust or mill scale.
- Remove old paint and clean old surface by appropriate sandpaper.
Step 2 - Primer: For metal surface apply 1-2 coat(s) of Homecote red oxide primer
Step 3 - Top coat: Apply 2 coats of Homecote alkyd high gloss enamel
*Note: Stir well before using and once opened, entire contents should be used.| Do not apply when temperature is lower than 15ºC or humidity is higher than 85%. Surface temperature must be 3ºC higher than the dew point

Homecote Red Oxide Primer

Intended use:

Technical Data

Construction methods

Construction Guide

Recommended paint system

Other products