SuperShield DuraClean A+ Matt

SuperShield DuraClean A+ Sheen - Ultra premium interior paint made from pure Acrylic produced by Biomass Balance technology using renewable organic materials, reducing the consumption of fossil materials and protecting environment.

Air Detoxify converts hormones in the air into steam for the purest indoor air quality, with a very slight odor.

Moreover, the paint film has a long-term antibacterial ability with Microban antibacterial technology without causing harm to humans.

A + certification for VOC emission concentrations according to French and European regulations at extremely low emissions, highest safety for users.

Sensitive Choice certifies products for people with asthma and allergies by the Australian National Asthma Council.

Excellent fungal prevention with advanced technology of nearly zero V.O.C (Volatile Organic Compound).

View DetailCompact

Technologies:

     

Intended use:

SuperShield DuraClean A+ Sheen - Ultra premium interior paint is highly recommended for children room, hospital, kindergarten, restaurant and hallway, etc...

Specifications

  • Component: Binder (30%-40%), Powder (25%-35%), Water (20%-30%)
  • Drying time (at 30oC): Touch dry 30 mins, Painting interval 2 hours
  • Theoretical coverage: 12 - 14 m2/litre/coat

Construction methods

  • - Application tools: Brush, Roller, Spray gun
  • - Dilution: dilute with 05-10% water by volume (depend on application), clean equipment with clean water immediately after using

Construction Guide

Step 1 - Surface Preparation:
- New surface:
+ Let the surface dry after 28 days in normal condition (average temperature is 30oC, relative humidity is about 80%), the substrate moisture is lower than 16% according to Protimeter. Remove all dust, grease, wax from the surface.
+ Apply 2 coats of TOA Wall Mastic interior for smooth surface
- Old surface:
+ Remove all dust, contamination, loose old paint. Treat the area attacked by fungus, algae with proper chemicals. Wash the surface if required, let it fully dry, the substrate moisture must be lower than 16% according to Protimeter.
+ Apply 1 coat of TOA 4 Seasons Super Contact Sealer for chalky or powdery surface after making surface clean.
Step 2 - Primer: Apply 1 coat of SuperShield Super Sealer
Step 3 - Topcoat: Apply 2 coats of SuperShield DuraClean A+ Semigloss
* Note: Stir well before use and once opened, entire content should be used. Do not apply when the air temperature is under 10oC, the relative humidity is higher than 80%

Recommended paint system

Putty: 2 coats of TOA Wall Mastic interior


Primer: Apply 1 coat of SuperShield Super Sealer


Topcoat: Apply 2 coats of SuperShield DuraClean A+ Matt

Send us a message