SuperShield DuraClean - Ultra Premium Interior Paint

Self-coloring paint

Color board

Technical Data

Product safety information

SuperShield Duraclean - Ultra Premium Interior Emulsion Paint is emulsion paint based on pure Acrylic which can protect the paint film from bacteria without any effect on human health through Microban technology of USA. Easy to wash and clean, so the finishing film is always more beautiful and brighter than other normal semigloss ones. Long lasting color without leaving any stain after cleaning. Ultimate anti-bacteria with advanced technology, low V.O.C

View DetailCompact

Technologies:

Intended use:

SuperShield DuraClean - Ultra premium interior paint is suitable for application on the surface: plaster, concrete, cement, brick, new/old wall surface... Especially for area that requires extra hygiene such as children bedroom, hospital, kindergarten, restaurant...

Component: Pure acrylic, pigments, additives & water.
Color: Refer to catalogue and TCW fan-deck
Paint film appearance: Semi-Gloss
Substrate temperature 30°C, relative humidity (RH) 50%: Surface drying time 0.5 hours; Painting interval, minimum 2 hours.
Theoretical coverage: 10.0 – 13.3 m²/liter/coat

Step 1 - Surface Preparation:

- New surface:

+ Let the surface dry after 28 days in normal condition (average temperature is 25°C -30°C, relative humidity under 75%), the surface moisture is not exceed 16% (specialized measuring testing equipment). pH value is about 6-9.

+ Remove all dust, grease, wax, laitance, chalking and other contamination from the surface by specialized machine as: grinding, sanding, vacuum cleaner, high pressure water jet and proper cleanness.

+ Apply 2 coats TOA PRO PUTTY for smooth surface.

- Old surface:

+ Remove all dust, contamination, loose old paint from the surface by specialized machine as: Grinding, sanding, vacuum cleaner, high pressure water jet and proper cleanness. Treat the area attacked by fungus, algae with proper chemicals.

+ Wash the surface if required, let it fully dry, the substrate moisture must be lower than 16% (specialized measuring testing equipment).

+ Repair the damaged area. Cracks bigger than 0.1mm must be fixed and smoothed by TOA PRO PUTTY.

+ Apply 1 coat of TOA HYDRO QUICK PRIMER - Premium multipurpose primer for chalky or powdery surface after making surface clean.

Step 2 - Sealer: Apply 1 coat of SuperShield Super Sealer.

Step 3 - Topcoat: Apply 2 coats of SuperShield DuraClean.

* Note: Stir well before use and once opened, entire content should be used. Apply when temperature is from 10°C to 35°C and relative humidity under 75%.

SuperShield DuraClean - Ultra Premium Interior Paint

Technologies:

Intended use:

Technical Data

Construction methods

Construction Guide

Recommended paint system

Other products