NITTO EXTRA

Nitto Extra interior emulsion paint is made from Styren Acrylic with the features of: smooth and beautiful finishing film, good adhesion, easy application and cost saving.


 

View DetailCompact

Intended use:

Nitto Extra emulsion is suitable for new and previously painted exterior masonry surface such as concrete, cement, brick, etc…

Technical Data

  • Color: prefer to catalogue
  • Component: binder (7% - 15%), powder (45% - 65%), water (15% - 25%) 
  • Drying time:
  • -    Touch dry: 30 mins
  • -    Painting interval: 120 mins
  • -    Theoretical coverage: approx. 10 (m2/litre/coat)

Construction methods

  • Application tools: brush, spray gun, roller
  • Dilution: clean water
  • Dilution ration: 5% - 10% (depend on application), clean equipment with water immediately after using.

Construction Guide

Step 1 - Surface preparation:
- New surface:
+ Let the surface dry after 28 days in normal condition (average temperature is 30℃, relative humidity is about 80%), the substrate moisture is lower than <16% according to specialized measuring devices. Remove all dust, grease, wax from the surface.
+ Apply 2 coats of Homecote interior for smooth surface.
- Old surface:
Remove all dust, contamination, loose old paint. Treat the area attacked by fungus, algae with proper chemicals. Wash the surface if required, let it fully dry, the substrate moisture must be lower than 16% according to specialized measuring devices.
Step 2 - Primer: Apply 1 coat of Supertech Pro interior primer.
Step 3 - Top coat: Apply 2 coats of Nitto Extra.
*Note: Stir well before use and once opened, entire content should be used. Do not apply when the air temperature is under <10℃, the relative humidity is higher than 80%.

Recommended paint system

Send us a message