TOA GOLD EMULSION

TOA Gold Emulsion is golden acrylic emulsion paint with "self-cleaning " technology and premium pearl pigment providing golden shade which looks like real gold and more durable than the normal. 

- Excellent adhesion, good anti-fungus and algae
- "Self-cleaning" technology helps paint film to be always clean and bright with excellent anti dirt pick-up resistance
- Formulation with premium pearl pigment provides sparkling golden paint film through an special effect of light reflection

View DetailCompact

Intended use:

TOA Gold Emulsion is suitable for application on both exterior and interior plaster, concrete, brick, gypsum board, for example around church area, pagoda, pavilion, the elongated and elaborately carved apex of the gable of a Buddhist temple, and an image of Buddha.

Specifications

  • Binder: 40% - 55%
  • Powder: 5% - 15%
  • Water: 20% - 35%
  • Additive: 1% - 5%
  • Color: Gold
  • Finish: Gloss
  • Specific gravity: 1.02 – 1.12
  • % Solid by weight: 33% - 41%
  • Theoretical coverage: 10-11 m2/ liters/coat approx. (dry film thickness 30 - 35 microns).
  • Drying time: Touch dry 30 mins
  • Painting interval: 120 mins

Construction methods

  • Application tools: Spray gun
  • Dilution: Dilute with 10% - 20% of clean water by volume.

Construction Guide

Step 1 - Surface Preparation:
  • New surface
- Let the surface dry after 28 days in normal condition (average temperature is 30 degree C, relative humidity is about 80%), the substrate moisture is lower than 16% Remove all dust, grease, wax from the surface.
- Apply 2 coats TOA WALL MASTIC EXTERIOR /TOA PRO PUTTY for smooth surface.
  • Old Surface
- Remove all dust, contamination, loose old paint. Treat the area attacked by fungus, algae with proper chemicals.
- Wash the surface if required, let it fully dry, the substrate moisture must be lower than 16%.
- Repair the damaged area. Cracks bigger than 0.1mm must be fixed and make smooth by TOA WALL MASTIC EXTERIOR/ TOA PRO PUTTY.
- Apply 1 coat of TOA SUPER CONTACT SEALER for chalky or powdery surface after making surface clean.
 
Step 2 - Primer:   1 coat of SUPERSHIELD SUPER SEALER
Step 3 - Top coat: 2-3 coats of TOA GOLD G005/G007
Remark:
- For opacity optimization and color shades diversification, should apply undercoat as below:
1-2 coats of Supershield yellow / red orange / red (#7861/#8045/#8093). 
- Stir well before use and once opened, entire content should be used. Do not apply when the air temperature is under 15oC, the relative humidity is higher than 80%.

Recommended paint system

  • Putty: 2 coats of TOA WALL MASTIC EXTERIOR / TOA PRO PUTTY
  • Primer: 1 coat of SUPERSHIELD SUPER SEALER
  • Topcoat: 2 - 3 coats of TOA GOLD G005/G007

Remark: For opacity optimization and color shades diversification, should apply undercoat as below: 1-2 coats of Supershield yellow / red orange / red (#7861/#8045/#8093)

 

Send us a message