TOA NanoShield

TOA NanoShield Hi Sheen - Ultra premium exterior paint is made from pure Acrylic with Hybrid Nano & Teflon™  technology which protects your house from water, dirt pick up with long lasting surface even under severe weather conditions. TOA NanoShield Hi Sheen includes features:
+ Silicon nano particles in TOA NanoShield get with excellent water resistance, protect buildings, houses from rain-water, wet climate...
+ Teflon™  - surface protection technology, gives smooth surface and anti dirt pick up, car smoke, oil, grease, makes your house always look clean and new.
+ TOA NanoShield Hi Sheen has been certified as green, environmentally friendly product. No added Lead & Mercury in the formula.
+ Moreover, TOA NanoShield Hi Sheen has got other outstanding properties: no peeling-off, anti-fungus or algae, high hiding, good coverage, long lasting color and durability under harsh weather conditions.
* Teflon™ is a registered trademark of the Chemours TT, LLC, and is used under license by TOA Paint (VietNam) Co, Ltd

View DetailCompact

Technologies:

        

Intended use:

TOA NanoShield Hi Sheen - Ultra premium exterior paint is suitable for new and previously painted exterior masonry surfaces such as concrete, cement, brick, etc...; especially for area that needs to be protected from severe weather conditions and dirty stain

Specifications

  • Component: Binder (30%-40%), Powder (20%-35%), Water (20%-30%)
  • Drying time: - Touch dry 30 mins
  • Painting interval: 2 hours
  • Theoretical coverage: 11-13 m²/litre/coat

Construction methods

  • Application tools: Brush, Roller, Spray gun
  • Application tools: Brush, Roller, Spray gun
  • Dilution: Clean water
  • Dilution ratio: 10%-15% (depend on application), clean equipment with clean water immediately after using

Construction Guide

Step 1 - Surface Preparation:
- New surface:
+ Let the surface dry after 28 days in normal condition (average temperature is 30oC, relative humidity is about 80%), the substrate moisture is lower than 16% according to Protimeter. Remove all dust, grease, wax from the surface.
+ Apply 2 coats of TOA Wall Mastic exterior for smooth surface
- Old surface:
+ Remove all dust, contamination, loose old paint. Treat the area attacked by fungus, algae with proper chemicals. Wash the surface if required, let it fully dry, the substrate moisture must be lower than 16% according to Protimeter.
+ Apply 1 coat of TOA 4 Seasons Super Contact Sealer for chalky or powdery surface after making surface clean.
Step 2 - Primer: Apply 1 coat of TOA NanoShield Primer
Step 3 - Topcoat: Apply 2 coats of TOA NanoShield High Sheen
* Note: Stir well before use and once opened, entire content should be used. Do not apply when the air temperature is under 15oC, the relative humidity is higher than 85%

Recommended paint system

Putty: 2 coats of TOA Wall Mastic exterior


Primer: Apply 1 coat of TOA NanoShield Primer


Topcoat: Apply 2 coats of TOA NanoShield Hi Sheen

Send us a message