TOA NanoClean Sheen

TOA NanoClean Sheen - Ultra premium interior paint is made from pure Acrylic with Hybrid Nano technology to keep your house safe, clean and durable. TOA NanoClean includes features:
- Silver Nano particles (Nano Silver) in TOA NanoClean can kill up to 99% bacteria (*) held to protect your whole family's health and fresh living environment.
- TOA NanoClean has been certified as green, environmentally friendly product. No added Lead, Mercury, APEO and Formaldehyde in the formula.
Moreover, TOA NanoClean has got other outstanding properties: smooth surface, anti-fungus or algae, easy to touch up, high hiding, good coverage, odourless and long lasting color.
 

View DetailCompact

Technologies:

     

Intended use:

TOA NanoClean Sheen - Ultra premium interior paint is suitable for new and previously painted interior masonry surfaces such as concrete, cement, brick, etc...It is highly recommended for area that requires extra hygiene such as hotel, restaurant, hospital, infirmary, healthcare center...

Specifications

  • Component: Binder (20%-35%), Powder (20%-35%), Water (15%-35%)
  • Drying time (at 30oC): Touch dry 30 mins, Painting interval 2 hours
  • Theoretical coverage: 13 - 16 m2/litre/coat

Construction methods

  • - Application tools: Brush, Roller, Spray gun
  • - Dilution: dilute with 10-15% water by volume (depend on application), clean equipment with clean water immediately after using

Construction Guide

Step 1 - Surface Preparation:
- New surface:
+ Let the surface dry after 28 days in normal condition (average temperature is 30oC, relative humidity is about 80%), the substrate moisture is lower than 16% according to Protimeter. Remove all dust, grease, wax from the surface. 
+ Apply 2 coats of TOA Wall Mastic interior for smooth surface
- Old surface:
+ Remove all dust, contamination, loose old paint. Treat the area attacked by fungus, algae with proper chemicals. Wash the surface if required, let it fully dry, the substrate moisture must be lower than 16% according to Protimeter.
Step 2 - Primer: Apply 1 coat of SuperShield Super Sealer
Step 3 - Topcoat: Apply 2 coats of SuperShield DuraClean A+ Semigloss
* Note: Stir well before use and once opened, entire content should be used. Do not apply when the air temperature is under 15oC, the relative humidity is higher than 80%

Recommended paint system

Putty: 2 coats of TOA Wall Mastic interior


Primer: Apply 1 coat of TOA NanoClean Primer


Topcoat: Apply 2 coats of TOA NanoClean Sheen

Send us a message