TOA Supertile

Self-coloring paint

Color board

Technical Data

Product safety information

TOA Supertile is a single-component, ready-mixed tile adhesive, offering high strength and versatility. It comprises hydraulic cement, specially selected fine sand, and unique chemical additives, offering high bonding strength, particularly beneficial for heavy tiles, outdoor installations, and areas exposed to moisture or temperature changes.

TOA Supertile provides the following beneficial properties:

- Factory-mixed for consistent quality and performance

- Easy to use and convenient: mix with water

- Suitable for various tile types and sizes based on requirements

- Strong adhesion, good prevents tile slippage

- Ideal for installing ceramic and terracotta tiles in swimming pools

- Smooth application, soft texture, easy to mix and work with

- Reduces labor time and improves overall work efficiency

Packaging: 20kg/bag

View DetailCompact

Intended use:

TOA Supertile is suitable for:
- Low-absorption tiles and general ceramic tiles.
- Tiles for swimming pools (Suitable for both interior and exterior pool areas).
- Standard tiles, Ceramic tiles, and Porcelain tiles (Maximum size 90cm x 90cm).
- General use for both floors and walls and can be used indoors and outdoors.
- Allow adjustments or realignment within 15 minutes of tile installation.

Usage rate: The average is 20 kg/ 4 m2
Recommended adhesive thickness: 2 - 10 mm
Color: Grey powder

SURFACE PREPARATION (NEW SURFACES):

Ensure the surface is firm, clean, and free from dust, debris, cement residues, grease, or other contaminants.
Thoroughly wash with water and scrub to remove any remaining debris or dust before applying TOA Supertile adhesive.
For porous surfaces, wet the surface until saturated before tile application.
Allow at least 7 days of curing before tile installation for new plaster or levelling surfaces.

SURFACE PREPARATION (EXISTING SURFACES):

Ensure the surface is clean, strong, and free from dust, debris, cement residues, paints and contaminants.
Wash and scrub the surface clean with water.
Remove any excess water on the surface before applying TOA Spertile adhesive.

APPLICATION:

Mix 20 kg of TOA Supertile with 4.8-5.2 liters of clean water (ratio 3:1). Use a low-speed mixer (~150 rpm) to blend until smooth.
Let the mixture rest for 5-10 minutes to activate the chemical components, then stir again before use.
Use a notched trowel to spread TOA Supertile adhesive evenly on the surface.
Using the notched side of the trowel in a single direction, create uniform grooves, ensuring the proper thickness for the tile size.
Place the tile onto the adhesive, pressing and tapping to secure complete contact and eliminate air gaps. This ensures maximum load-bearing capacity and prevents future tile detachment.
Adjust tiles as needed within 15 minutes of application. Avoid adjustments beyond this period.

CURING AND GROUTING:

Depending on environmental conditions, allow 24-48 hours of curing after tile installation before grouting.
Use TOA Premium grout that is suitable for the specific tile and application requirements.

RECOMMENDATION:

Ensure surfaces are thoroughly moistened without standing water before tile installation.
Avoid working in extreme heat or direct sunlight to prevent premature drying.
Wear safety gear, such as gloves, dust masks, and goggles. If the product encounters your eyes, rinse immediately and seek medical attention.
Keep children out of reach and do not ingest
Clean tools with water immediately after use, before the material dries
Avoid using the adhesive for tiling on wooden surfaces, asphalt sheets, coated walls, plastic, PVC, metal, or glass (Do not expose to extreme cold for 72 hours).

TOA Supertile

Intended use:

Technical Data

Construction methods

Construction Guide

Recommended paint system

Other products