TOA Ecotile Tile adhesive

• Tools: Notched trowel, traditional trowel, handheld mixer
• Mixing ratio: Mix 20 kg of TOA ECOTILE with 4.0-4.4 liters of clean water. Use a low-speed mixer (~150 rpm) to blend until smooth.
• After use: Wash all tools thoroughly with water immediately after use.

SURFACE PREPARATION (NEW SURFACES):
- Ensure the surface is firm, clean, and free from dust, debris, cement residues, grease, or other contaminants.
- Thoroughly wash with water and scrub to remove any remaining debris or dust before applying TOA Ecotile.
- For porous surfaces, wet the surface until saturated before tile application.
- Allow at least 7 days of curing before tile installation for new plaster or levelling surfaces.

SURFACE PREPARATION (EXISTING SURFACES):
- Ensure the surface is clean, strong, and free from dust, debris, cement residues,
paints and contaminants.
- Wash and scrub the surface clean with water.
- Remove any excess water on the surface before applying TOA ECOTILE.

APPLICATION:
- Mix 20 kg of TOA ECOTILE with 4.0-4.4 liters of clean water. Use a low-speed mixer (~150 rpm) to blend until smooth.
- Let the mixture rest for 5-10 minutes to activate the chemical components, then stir again before use.
- Use a notched trowel to spread TOA PROTILE evenly on the surface.
- Using the notched side of the trowel in a single direction, create uniform grooves, ensuring the proper thickness for the tile size.
- Place the tile onto the adhesive, pressing and tapping to secure complete contact and eliminate air gaps. This ensures maximum load-bearing capacity and prevents future tile detachment.
- Adjust tiles as needed within 15 minutes of application. Avoid adjustments beyond this period.

CURING AND GROUTING:
- Depending on environmental conditions, allow 24-48 hours of curing after tile installation before grouting.
- Use TOA Premium Grout that is suitable for the specific tile and application requirements.

RECOMMENDATION:
- Ensure surfaces are thoroughly moistened without standing water before tile installation.
- Avoid working in extreme heat or direct sunlight to prevent premature drying.
- Wear safety gear, such as gloves, dust masks, and goggles. If the product encounters your eyes, rinse immediately and seek medical attention.
- Keep children out of reach and do not ingest.
- Clean tools with water immediately after use, before the material dries.
- Avoid using the adhesive for tiling on wooden surfaces, asphalt sheets, coated walls, plastic, PVC, metal, or glass. (Do not expose to extreme cold for 72 hours).