TOA PU Foam

Self-coloring paint

Color board

Technical Data

Product safety information

TOA PU Foam is a polyurethane foam, one-component, self-expanding and ready to-use. It contains CFC-free blowing agents, harmless to the ozone layer.

TOA PU Foam provides the following beneficial properties:

- Excellent adhesion on most substrates (except PE, PP and PTFE).

- Good thermal and acoustical insulation.

- Very good filling capacities.

- Excellent mounting capacities.

- Excellent stability (no shrink or post expansion).

Packaging: 750 ML

View DetailCompact

Intended use:

TOA PU Foam is mainly used for:
- Filling of window and door frames.
- Filling of cavities, gaps.
- Sealing of all openings in roof constructions.
- Creation of a soundproof screen.
- Connecting insulation materials and roof constructions.
- Application of a soundproofing layer on motors.
- Improving thermal isolation in cooling systems.

SURFACE PREPARATION:

- The substrates should be clean, free of oil and grease.

- Moisten surfaces with a water sprayer prior to application.

APPLICATION:

- Shake the aerosol can for at least 20 seconds. Fill holes and cavities for 40 – 50%, as the foam will expand.

- Repeat shaking regularly during application. If you have to work in layers repeat moistening after each layer.

- Fresh foam can be removed using acetone.

- Cured foam can only be removed mechanically.

RECOMMENDATION:

- The working temperature must be 5ºC to 35ºC.

- Protect the products from direct sun and temperature above + 50ºC (danger of explosion).

- For the correct curing of the foam sufficient moisture is necessary.

- Do not use PE, PP, Teflon (PTFE), silicone, oil, grease and other separating agents.

Foam is not resistant to UV light.

TOA PU Foam

Intended use:

Technical Data

Construction methods

Construction Guide

Recommended paint system

Other products