Premium interior emulsion paint

TOA Thoai Mai Lau Chui sheen is made from Acrylic emulsion. Clean Max technology helps to remove easily common house hold stains without damaging the beauty of paint film. Beautiful smooth paint film, high coverage, maximum wash resistance and the slight scent of Violet flower bring a comfortable feeling for your living space. No added Lead, Mercury, APEO and Formaldehyde.

View DetailCompact

Technologies:

Intended use:

TOA Thoai Mai Lau Chui sheen is suitable for new and previously painted interior masonry surface such as concrete, cement, brick, etc.

Color: Refer to catalogue and TOA fan deck
Component: Binder (15% - 20%), Powder (20% - 35%), Water (20% - 30%)
Drying time:
- Touch dry 30 mins:
- Painting interval: 120 mins
Theoretical coverage: 13 - 15 m²/ litre/ coat

Application tools: Brush, roller, spray gun
Dilution: Clean water
Dilution ratio: 10% - 15% (depend on application), clean equipment with water immediately after using.

Step 1 - Surface preparation:
- New surface:
+ Let the surface dry after 28 days in normal condition (average temperature is 30^oC, relative humidity is about 80%), the substrate moisture is lower than <16% according to Protimeter. Remove all dust, grease, wax from the surface.
+ Apply 2 coats of TOA Wall Mastic interior for smooth surface.
- Old surface:
+ Remove all dust, contamination, loose old paint. Treat the area attacked by fungus, algae with proper chemicals. Wash the surface if required, let it fully dry, the substrate moisture must be lower than 16% according to Protimeter.
Step 2 - Primer: Apply 1 coat of TOA NanoClean primer.
Step 3 - Topcoat: Apply 2 coats of TOA Thoai Mai Lau Chui sheen.
* Note: Stir well before use and once opened, entire content should be used. Do not apply when the air temperature is under 15^oC, the relative humidity is higher than 80%.

Premium interior emulsion paint

Technologies:

Intended use:

Specifications

Construction methods

Construction Guide

Recommended paint system

Other products