SuperShield

SuperShield Sheen - Ultra premium exterior paint is produced from pure Acrylic in which Self Cleaning technology is applied, and highly durable pigment with Ti-Pure™. SuperShield has got outstanding properties:
+ Ti-Pure™ pigment developed from Titanium Triple Protection technology to provide long lasting durability;
+ Self Cleaning technology helps to maintain a fresh, clean and firm film.
+ SuperShield has achieved fifteen years of outdoor performance.
*** Ti-Pure™ is a trademark of the Chemours Company TT, LLC, and is used under license by TOA Paint (VietNam) Co, Ltd.

View DetailCompact

Technologies:

           

Intended use:

SuperShield Sheen - Ultra premium exterior paint is suitable for the buildings that require high durability and aesthetic. It can be used for new and previously painted exterior masonry surfaces such as concrete, cement, brick, etc...

Specifications

  • Component: Binder (30%-50%), Powder (20%-35%), Water (10%-15%), Additive (1%-5%)
  • Drying time:
  • - Touch dry: 30 mins
  • - Painting interval: 2 hours
  • Theoretical coverage: 11-13 m²/litre/coat

Construction methods

  • Application tools: Brush, Roller, Spray gun
  • Dilution: Clean water
  • Dilution ratio: 10%-15% (depend on application), clean equipment with clean water immediately after using

Construction Guide

Step 1 - Surface Preparation:
- New surface:
+ Let the surface dry after 28 days in normal condition (average temperature is 30oC, relative humidity is about 80%), the substrate moisture is lower than 16% according to Protimeter. Remove all dust, grease, wax from the surface.
+ Apply 2 coats of TOA Pro Putty/ TOA Wall Mastic exterior for smooth surface
- Old surface:
+ Remove all dust, contamination, loose old paint. Treat the area attacked by fungus, algae with proper chemicals. Wash the surface if required, let it fully dry, the substrate moisture must be lower than 16% according to Protimeter.
+ Apply 1 coat of TOA 4 Seasons Super Contact Sealer for chalky or powdery surface after making surface clean.
Step 2 - Primer: Apply 1 coat of SuperShield Super Sealer
Step 3 - Topcoat: Apply 2 coats of SuperShield High Sheen
*Note: Stir well before use and once opened, entire content should be used. Do not apply when the air temperature is under 15oC, the relative humidity is higher than 85%

Recommended paint system

Putty: 2 coats of TOA Pro Putty/ TOA Wall Mastic exterior


Primer: Apply 1 coat of SuperShield Super Sealer


Topcoat: Apply 2 coats of SuperShield Sheen

Send us a message